Surface treatment - hot dip galvanizing; pre galvanizing; electro galvanizing; stainless steel
Weight - 2.59kg/m (weight of U-groove on hot dip galvanized surface)
Thickness - 2.0 mm, 2.5 mm
Specification - 41mm × 41mm
Standard length - 3m or 6M
R41-20 | ||||||||||
Uniform load | Concentrated load | Axial load | ||||||||
Horizontal support spacing (mm) | Allowable compressive load and deflection | Ultimate bearing capacity(Kg) | Allowable compressive load and deflection | Ultimate bearing capacity(Kg) | Center of gravity load(Kg) | Center of gravity load(Kg) | ||||
load(Kg) | deflection (mm) | load/ 200 | deflection/ 360 | load(Kg) | deflection(mm) | load/200 | deflection/360 | |||
500 | 713 | 0.96 | 713 | 713 | 356 | 0.77 | 356 | 356 | 3880 | 1239 |
1000 | 356 | 3.83 | 356 | 257 | 178 | 3.06 | 178 | 161 | 3247 | 1144 |
1500 | 237 | 8.61 | 206 | 114 | 118 | 6.86 | 118 | 71 | 2091 | 939 |
2000 | 178 | 15.32 | 116 | 64 | 89 | 12.26 | 72 | 40 | 1321 | 674 |
2500 | 142 | 23.88 | 74 | 41 | 71 | 19.10 | 46 | 25 | 880 | 448 |
3000 | 118 | 34.29 | 51 | 28 | 59 | 27.43 | 32 | 17 | - | - |
产品型号 | X-X axis | Y-Y axis | ||||||
Lxx cm4 | Zxx cm3 | Rxx cm | Lyy cm4 | Zyy cm3 | Ryy cm | Area cm2 | ||
R41-20 | 5.79 | 2.50 | 1.46 | 7.51 | 3.66 | 1.66 | 2.70 |
L-moment of inertia, z-bending moment, r-radius of gyration, area of cross-section
R41-25 | ||||||||||
Uniform load | Concentrated load | Axial load | ||||||||
Horizontal support spacing (mm) | Allowable compressive load and deflection | Ultimate bearing capacity(Kg) | Allowable compressive load and deflection | Ultimate bearing capacity(Kg) | Center of gravity load(Kg) | Acting on surface load(Kg) | ||||
load(Kg) | deflection (mm) | load/200 | deflection /360 | load(Kg) | deflection (mm) | load/200 | deflection /360 | |||
500 | 927 | 1.00 | 927 | 927 | 463 | 0.80 | 463 | 463 | 5003 | 2129 |
1000 | 463 | 3.98 | 463 | 322 | 231 | 3.18 | 231 | 201 | 3343 | 1422 |
1500 | 309 | 8.96 | 258 | 143 | 154 | 7.15 | 161 | 89 | 2510 | 1068 |
2000 | 231 | 15.88 | 145 | 81 | 115 | 12.65 | 90 | 50 | 2009 | 855 |
2500 | 185 | 24.84 | 93 | 52 | 92 | 19.77 | 58 | 32 | 1674 | 712 |
3000 | 154 | 35.74 | 64 | 35 | 77 | 28.59 | 40 | 22 | - | - |
产品型号 | X-X轴 | Y-Y轴 | ||||||
Lxx cm4 | Zxx cm3 | Rxx cm | Lyy cm4 | Zyy cm3 | Ryy cm | Area cm2 | ||
R41-25 | 7.25 | 3.25 | 1.49 | 9.25 | 4.48 | 1.69 | 3.25 |
L-moment of inertia, z-bending moment, r-radius of gyration, area of cross-section
① U-channel steel, as the basic stress component of the support and hanger, can be configured with various parts to form a complete structural support system.
② It is convenient for installation, maintenance and expansion of various pipelines, cable trays and equipment.
③ The optimized cross-section design determines the high bearing capacity of U-channel.
④ The tooth design of the inner edge of U-channel steel makes the connection between channel steel and spring nut safer.
⑤ It can be connected with wall, floor, ceiling and other structures.
⑥ A variety of instant noodles can be used in different environments.
Installation:
① After the embedded spring nut is rotated 90 degrees, it moves along the groove body to fix the nut at the required position of the nut.
② Install the connection piece.
③ Connect other components.
④ According to the installation torque of spring nut, tighten the bolt.
Copyright © 2020 U Channel Advanced Materials Technology (Shanghai) Co., Ltd