The device of the pipe support and hanger is greatly affected by the environment, how to borrow the external environment during installation, let's briefly introduce how to use some external environments that we often encounter:

1. As far as possible, use the component support of the existing civil construction layout and support on the beams and columns of the pipe gallery;

2. Try to reduce the force received by the equipment. If the support is close to the receiver, no large thermal expansion and bending moment will occur to the receiver;

3. The orientation and type of supports and hangers should minimize the adverse effects of force on the rooted parts.

4. The interval between the load-bearing frames should not be greater than the maximum distance of the brackets;

5. A load-bearing frame should be made near the elbow of the straight pipe section or above the center of gravity of the straight section. When the straight section is long, a guide frame can be added at the lower part (when the load is large, a spring frame can be used to separate the load);

6. Set up a load-bearing frame adjacent to the pipeline components with a large gathering load;

7. Consider the convenience of repair, so that it is best not to make temporary supports when disassembling the pipe section.

As a manufacturer specializing in the production of integrated supports and hangers, Shanghai Youcao recommends the best quality products and best services of our company for you, not very pleased. Since its establishment, HALFEN has been pursuing high-quality products and first-class service to provide customers with the best. Customer satisfaction is our greatest pursuit!