Welcome U Channel  Advanced Materials Technology (Shanghai) Co., Ltd

Tasks and requirements of equipment control for fabricated supports and hangers

Publisher:admin Date of issue:2020-11-11 Views:4

1. Industrial production has many requirements for process equipment control, which can ultimately be summarized into three requirements: safety, economy and stability. Safety refers to ensuring the safety of people and equipment throughout the production process. This is the most important and basic requirement. It is usually ensured by measures such as over-limit alarm, accident reporting and chain protection.


2. With the continuous development of control technology and computer technology, online fault prediction and diagnosis, fault-tolerant control and other technologies can further improve the security of the system. Economy refers to the least energy and raw materials consumed in producing products of the same quality and number of pots. That is, it requires low production cost and high efficiency. With the intensified market competition and lack of energy to send. Economics has become increasingly popular in all aspects.


3. One of the most important features of the assembled support and hanger produced by the excellent trough is stability, which means that the system should have the ability to resist external interference and maintain the long-term stable operation of the production process. During the production process, changes in the composition of raw materials, aging of the catalyst in the reactor, and fouling on the surface of the heat exchanger will more or less affect the stability of the production process. In order to meet the above three requirements, there are still many problems to be studied in theory and practice.


4. The task of equipment control in the production process of the PE pipe support assembly support and hanger is to understand and master the static and dynamic characteristics of the technological process and the production process, according to the above three requirements, apply the theory to analyze and integrate the control system , And finally adopt appropriate technical means to achieve it. Therefore, it can be said that process equipment control is a comprehensive applied science composed of control theory, process knowledge, computer technology and instrumentation.


5. The energy-saving heat treatment of the PE pipe bracket assembly supports and hangers emphasizes that the waste heat after the casting and forging process should be fully utilized for the heat treatment (cast iron quenching, rolling heat Flame fire, forging heat quenching), save the high heat required for re-austenitizing. In addition, the original heat treatment process can be simplified by developing new materials. With the rapid development of the modern automobile manufacturing industry, the demand for high-performance forgings is increasing. Anhui alloy non-quenched and tempered steel has become popular in automobile manufacturing due to its excellent energy-saving, material-saving, low-pollution performance Eyes.